All MIBs › ZXR10-PROTOCOL-ROUTERS-MIB › zxr10prIPv4VrfRouteType
zxr10prIPv4VrfRouteType
Module: ZXR10-PROTOCOL-ROUTERS-MIB
OID (symbolic): ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteType
OID (numeric): 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture.
Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the zxr10VrfRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant zxr10VrfRouteType object.
What is zxr10prIPv4VrfRouteType?
A read-only classification of this VRF route as other(1), invalid(2), direct(3, a directly connected subnet), or indirect(4, a non-local host/network reached via another router). An admin checks this to distinguish a directly attached network route from one learned and forwarded through another hop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.8 snmpwalk -v2c -c public <target> ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.8.1 snmpget -v2c -c public <target> ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteType.1
Start monitoring ZTE ZXR10 carrier routers/switches (per-VRF IPv4/IPv6 route-table capacity/inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteType OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 carrier routers/switches (per-VRF IPv4/IPv6 route-table capacity/inventory status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.160 | zxr10ProtocolRoutesMIB | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2 | zxr10ProtocolRoutesObjects | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1 | zxr10ProtocolRoutesIPv4Objects | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1.2 | zxr10prIPv4VrfRouteTable | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1 | zxr10prIPv4VrfRouteEntry | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.8 | zxr10prIPv4VrfRouteType | ZXR10-PROTOCOL-ROUTERS-MIB |