All MIBs › ZXR10-PROTOCOL-ROUTERS-MIB › zxr10prIPv4VrfRouteMask
zxr10prIPv4VrfRouteMask
Module: ZXR10-PROTOCOL-ROUTERS-MIB
OID (symbolic): ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteMask
OID (numeric): 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.11
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the zxr10VrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the zxr10VrfRouteMask by determining whether the value of the correspondent zxr10VrfRouteDest field belong to a class-A, B, or C network, and then using one of:
mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C
If the value of the zxr10VrfRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
What is zxr10prIPv4VrfRouteMask?
A read-only subnet mask that, ANDed with the destination address, is compared against this VRF route's destination to determine a match; a default route (0.0.0.0 destination) always has a 0.0.0.0 mask. An admin reads this to know the actual matched network scope for a given VRF route entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.11 snmpwalk -v2c -c public <target> ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.11.1 snmpget -v2c -c public <target> ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteMask.1
Start monitoring ZTE ZXR10 carrier routers/switches (per-VRF IPv4/IPv6 route-table capacity/inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-PROTOCOL-ROUTERS-MIB::zxr10prIPv4VrfRouteMask OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 carrier routers/switches (per-VRF IPv4/IPv6 route-table capacity/inventory status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.160 | zxr10ProtocolRoutesMIB | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2 | zxr10ProtocolRoutesObjects | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1 | zxr10ProtocolRoutesIPv4Objects | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1.2 | zxr10prIPv4VrfRouteTable | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1 | zxr10prIPv4VrfRouteEntry | ZXR10-PROTOCOL-ROUTERS-MIB |
| 1.3.6.1.4.1.3902.3.6000.160.2.1.2.1.11 | zxr10prIPv4VrfRouteMask | ZXR10-PROTOCOL-ROUTERS-MIB |