All MIBs › ZXR10-PEB-MIB › pebPortCfgPriority
pebPortCfgPriority
Module: ZXR10-PEB-MIB
OID (symbolic): ZXR10-PEB-MIB::pebPortCfgPriority
OID (numeric): 1.3.6.1.4.1.3902.3.6000.510.2.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The priority of the port. When transmitted from a Port capable of operating as a cascade Port (e.g. Ports of a Controlling Bridge or Extended Ports of an Extended Bridge), indicates the cascade_port_priority used in determining which Port is to be used by a Bridge Port Extender as its Upstream Port.
Valid values are the range from 0 to 254. When transmitted from a Bridge Port Extender on an Upstream Port or a Port capable of becoming an Upstream Port, this parameter shall be set to 255.
The default value for pebPortCfgPriority object is 100.
What is pebPortCfgPriority?
This sets the cascade port priority used to determine which port a Bridge Port Extender selects as its Upstream Port toward the controller. An admin tunes this on candidate cascade ports to control failover and selection order in a redundant extended-bridge topology; ports capable of becoming an Upstream Port must be set to 255. For example, lowering one cascade port's priority below the default of 100 makes it the preferred choice as the extender's upstream link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.510.2.1.1.3 snmpwalk -v2c -c public <target> ZXR10-PEB-MIB::pebPortCfgPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.510.2.1.1.3.1 snmpget -v2c -c public <target> ZXR10-PEB-MIB::pebPortCfgPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.6000.510.2.1.1.3.1 i <value>
Start monitoring ZTE ZXR10 switch/router family with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-PEB-MIB::pebPortCfgPriority OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 switch/router family from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.510 | zxr10PebMIB | ZXR10-PEB-MIB |
| 1.3.6.1.4.1.3902.3.6000.510.2 | zxr10PebPortCfgObjects | ZXR10-PEB-MIB |
| 1.3.6.1.4.1.3902.3.6000.510.2.1 | zxr10PebPortCfgTable | ZXR10-PEB-MIB |
| 1.3.6.1.4.1.3902.3.6000.510.2.1.1 | zxr10PebPortCfgEntry | ZXR10-PEB-MIB |
| 1.3.6.1.4.1.3902.3.6000.510.2.1.1.3 | pebPortCfgPriority | ZXR10-PEB-MIB |