All MIBs › ZXR10-OPTICAL-ALARM-MIB › zxr10optAlarmOverCurValue
zxr10optAlarmOverCurValue
Module: ZXR10-OPTICAL-ALARM-MIB
OID (symbolic): ZXR10-OPTICAL-ALARM-MIB::zxr10optAlarmOverCurValue
OID (numeric): 1.3.6.1.4.1.3902.3.126.1.1.1.6
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description:
What is zxr10optAlarmOverCurValue?
This value reports the current measured reading of the alarmed optical parameter at the time the threshold was exceeded. An admin uses this to see the actual out-of-range reading rather than just knowing that some threshold was crossed, aiding severity assessment. Illustratively, for a high-temperature alarm this might report a string like "78.5" representing the transceiver's temperature in degrees Celsius at alarm time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.126.1.1.1.6 snmpwalk -v2c -c public <target> ZXR10-OPTICAL-ALARM-MIB::zxr10optAlarmOverCurValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.126.1.1.1.6.1 snmpget -v2c -c public <target> ZXR10-OPTICAL-ALARM-MIB::zxr10optAlarmOverCurValue.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> zxr10optAlarmOverCurValue.1
Start monitoring ZTE ZXR10 switch/router (optical transceiver loss-of-signal/power-level alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-OPTICAL-ALARM-MIB::zxr10optAlarmOverCurValue OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 switch/router (optical transceiver loss-of-signal/power-level alarm status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | ZXR10-BFD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.126 | zxr10OpticalAlarmMIB | ZXR10-OPTICAL-ALARM-MIB |
| 1.3.6.1.4.1.3902.3.126.1 | zxr10MIBObjects | ZXR10-OPTICAL-ALARM-MIB |
| 1.3.6.1.4.1.3902.3.126.1.1 | zxr10optAlarmTable | ZXR10-OPTICAL-ALARM-MIB |
| 1.3.6.1.4.1.3902.3.126.1.1.1 | zxr10optAlarmEntry | ZXR10-OPTICAL-ALARM-MIB |
| 1.3.6.1.4.1.3902.3.126.1.1.1.6 | zxr10optAlarmOverCurValue | ZXR10-OPTICAL-ALARM-MIB |