All MIBs › ZXR10-MPLS-OAM-MIB › zxr10MplsOamEnable
zxr10MplsOamEnable
Module: ZXR10-MPLS-OAM-MIB
OID (symbolic): ZXR10-MPLS-OAM-MIB::zxr10MplsOamEnable
OID (numeric): 1.3.6.1.4.1.3902.3.317.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: If this object is enable(1), then it enables the zxr10MplsOam;or it disables the zxr10MplsOam
What is zxr10MplsOamEnable?
Turns MPLS OAM (Operations, Administration and Maintenance) on(1) or off(0) for the whole device; this must be enabled before any of the per-tunnel OAM monitoring objects in this MIB will report meaningful data.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.317.1.1.1 snmpwalk -v2c -c public <target> ZXR10-MPLS-OAM-MIB::zxr10MplsOamEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.317.1.1.1.1 snmpget -v2c -c public <target> ZXR10-MPLS-OAM-MIB::zxr10MplsOamEnable.1
Start monitoring ZTE ZXR10 MPLS routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-MPLS-OAM-MIB::zxr10MplsOamEnable OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 MPLS routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.317 | zxr10MplsOam | ZXR10-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.317.1 | zxr10MplsOamMIB | ZXR10-MPLS-OAM-MIB |
| 1.3.6.1.4.1.3902.3.317.1.1 | zxr10MplsOamScalarsObjects | ZXR10-MPLS-OAM-MIB |
| 1.3.6.1.4.1.3902.3.317.1.1.1 | zxr10MplsOamEnable | ZXR10-MPLS-OAM-MIB |