ZXR10-LOG-MIB :: syncLogFlowID

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-LOG-MIB › syncLogFlowID

syncLogFlowID

Module: ZXR10-LOG-MIB

OID (symbolic): ZXR10-LOG-MIB::syncLogFlowID

OID (numeric): 1.3.6.1.4.1.3902.3.305.1.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Flow identifier or serial number

What is syncLogFlowID?

This read-only value, now marked obsolete in the MIB, was the flow identifier or serial number distinguishing one entry in the synchronization log table from another. An admin encountering this object on older ZXR10 firmware would use it to reference a specific logged synchronization event. For example, flow ID 42 would uniquely identify one particular sync-log record among many collected over time.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.305.1.1.1
snmpwalk -v2c -c public <target> ZXR10-LOG-MIB::syncLogFlowID

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.305.1.1.1.1
snmpget -v2c -c public <target> ZXR10-LOG-MIB::syncLogFlowID.1

Start monitoring ZTE ZXR10 router/switch (command/event-log audit-trail status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-LOG-MIB::syncLogFlowID OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router/switch (command/event-log audit-trail status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.305logZXR10-LOG-MIB
1.3.6.1.4.1.3902.3.305.1syncLogTableZXR10-LOG-MIB
1.3.6.1.4.1.3902.3.305.1.1syncLogEntryZXR10-LOG-MIB
1.3.6.1.4.1.3902.3.305.1.1.1syncLogFlowIDZXR10-LOG-MIB