All MIBs › ZXR10-LOG-MIB › operLogVtyNo
operLogVtyNo
Module: ZXR10-LOG-MIB
OID (symbolic): ZXR10-LOG-MIB::operLogVtyNo
OID (numeric): 1.3.6.1.4.1.3902.3.305.2.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Vty number. 0:con0, 1-n:vty0-vty(n-1)
What is operLogVtyNo?
This read-only value records which virtual terminal session was used for this logged operation, using 0 for the console (con0) and 1-n for vty0 through vty(n-1). An admin uses it to identify exactly which login session on the device issued the logged command. For example, a value of 0 indicates the command was entered from the physical console port rather than a remote terminal session.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.305.2.1.6 snmpwalk -v2c -c public <target> ZXR10-LOG-MIB::operLogVtyNo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.305.2.1.6.1 snmpget -v2c -c public <target> ZXR10-LOG-MIB::operLogVtyNo.1
Start monitoring ZTE ZXR10 router/switch (command/event-log audit-trail status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-LOG-MIB::operLogVtyNo OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router/switch (command/event-log audit-trail status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.305 | log | ZXR10-LOG-MIB |
| 1.3.6.1.4.1.3902.3.305.2 | operLogTable | ZXR10-LOG-MIB |
| 1.3.6.1.4.1.3902.3.305.2.1 | operLogEntry | ZXR10-LOG-MIB |
| 1.3.6.1.4.1.3902.3.305.2.1.6 | operLogVtyNo | ZXR10-LOG-MIB |