All MIBs › ZXR10-LOG-MIB › operLogCmdString
operLogCmdString
Module: ZXR10-LOG-MIB
OID (symbolic): ZXR10-LOG-MIB::operLogCmdString
OID (numeric): 1.3.6.1.4.1.3902.3.305.2.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Command string
What is operLogCmdString?
This read-only string holds the actual text of the command that was executed and recorded in this operation log entry. An admin reads it during an audit to see the exact CLI command an operator ran on the device. For example, this might return a command string like "reload" or "config interface gei-0/1/1 shutdown", letting the admin confirm precisely what change was made.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.305.2.1.3 snmpwalk -v2c -c public <target> ZXR10-LOG-MIB::operLogCmdString
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.305.2.1.3.1 snmpget -v2c -c public <target> ZXR10-LOG-MIB::operLogCmdString.1
Start monitoring ZTE ZXR10 router/switch (command/event-log audit-trail status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-LOG-MIB::operLogCmdString OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router/switch (command/event-log audit-trail status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.305 | log | ZXR10-LOG-MIB |
| 1.3.6.1.4.1.3902.3.305.2 | operLogTable | ZXR10-LOG-MIB |
| 1.3.6.1.4.1.3902.3.305.2.1 | operLogEntry | ZXR10-LOG-MIB |
| 1.3.6.1.4.1.3902.3.305.2.1.3 | operLogCmdString | ZXR10-LOG-MIB |