All MIBs › ZTE-AN-OPTICAL-MODULE-MIB › zxAnOpticalTransDistanceSmLongR
zxAnOpticalTransDistanceSmLongR
Module: ZTE-AN-OPTICAL-MODULE-MIB
OID (symbolic): ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceSmLongR
OID (numeric): 1.3.6.1.4.1.3902.1082.30.40.2.4.1.40
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This value specifies the transfer distance that is supported by the transceiver while operating in compliance with the applicable standards using single mode based long reach fiber. The value is in units of kilometers. A value of 255 means the transceiver supports a transfer distance greater than 254 km. A value of zero means the transceiver does not support single mode fiber or that the transfer distance information must be determined from the transceiver technology.
What is zxAnOpticalTransDistanceSmLongR?
This read-only value, in kilometers, reports the maximum transfer distance the transceiver supports on single-mode long-reach fiber; 255 means greater than 254km, and 0 means single-mode isn't supported or the distance must be derived from the transceiver's technology type. Admins use it to verify a transceiver can reach the required span before deploying it on a long fiber run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.40.2.4.1.40 snmpwalk -v2c -c public <target> ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceSmLongR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.40.2.4.1.40.1 snmpget -v2c -c public <target> ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceSmLongR.1
Start monitoring ZTE access node (OLT/ONU with pluggable optical transceivers) (transceiver presence/DDM optical-power/temperature status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceSmLongR OID value, configure state conditions and alerts, and monitor any ZTE access node (OLT/ONU with pluggable optical transceivers) (transceiver presence/DDM optical-power/temperature status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.30 | zxAnInterface | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.40 | zxAnOpticalModuleMib | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2 | zxAnOpticalModuleObjects | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4 | zxAnOpticalModuleInfoTable | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1 | zxAnOpticalModuleInfoEntry | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.40 | zxAnOpticalTransDistanceSmLongR | ZTE-AN-OPTICAL-MODULE-MIB |