All MIBs › ZTE-AN-OPTICAL-MODULE-MIB › zxAnOpticalTransDistanceOm2
zxAnOpticalTransDistanceOm2
Module: ZTE-AN-OPTICAL-MODULE-MIB
OID (symbolic): ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceOm2
OID (numeric): 1.3.6.1.4.1.3902.1082.30.40.2.4.1.43
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 50 micron multimode OM2(500 MHz*km at 850nm) fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a transfer distance greater than 2.54km. A value of zero means that the transceiver does not support OM2 fiber or the transfer distance must determined from the transceiver technology.
What is zxAnOpticalTransDistanceOm2?
This read-only value, in units of 10 meters, reports the maximum transfer distance the transceiver supports on 50-micron OM2 multimode fiber; 255 means greater than 2.54km, and 0 means OM2 isn't supported or the distance must be derived from the transceiver's technology type. Admins use it when planning runs over OM2-grade multimode fiber.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.40.2.4.1.43 snmpwalk -v2c -c public <target> ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceOm2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.40.2.4.1.43.1 snmpget -v2c -c public <target> ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceOm2.1
Start monitoring ZTE access node (OLT/ONU with pluggable optical transceivers) (transceiver presence/DDM optical-power/temperature status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceOm2 OID value, configure state conditions and alerts, and monitor any ZTE access node (OLT/ONU with pluggable optical transceivers) (transceiver presence/DDM optical-power/temperature status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.30 | zxAnInterface | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.40 | zxAnOpticalModuleMib | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2 | zxAnOpticalModuleObjects | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4 | zxAnOpticalModuleInfoTable | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1 | zxAnOpticalModuleInfoEntry | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.43 | zxAnOpticalTransDistanceOm2 | ZTE-AN-OPTICAL-MODULE-MIB |