All MIBs › ZTE-AN-OPTICAL-MODULE-MIB › zxAnOpticalTransDistanceCopper
zxAnOpticalTransDistanceCopper
Module: ZTE-AN-OPTICAL-MODULE-MIB
OID (symbolic): ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceCopper
OID (numeric): 1.3.6.1.4.1.3902.1082.30.40.2.4.1.45
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using copper cable. For active cable, this value represents actual length. The value is in units of 1 meter. A value of 255 means that the transceiver supports a transfer distance greater than 254m. A value of zero means that the transceiver does not support copper or active cables or the transfer distance must determined from the transceiver technology.
What is zxAnOpticalTransDistanceCopper?
This read-only value, in meters, reports the maximum transfer distance the transceiver supports over copper or active cable (for active cables, the actual cable length); 255 means greater than 254m, and 0 means copper/active cable isn't supported or the distance must be derived from the transceiver's technology type. Admins use it to confirm a direct-attach copper cable's supported reach before ordering or installing it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.40.2.4.1.45 snmpwalk -v2c -c public <target> ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceCopper
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.40.2.4.1.45.1 snmpget -v2c -c public <target> ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceCopper.1
Start monitoring ZTE access node (OLT/ONU with pluggable optical transceivers) (transceiver presence/DDM optical-power/temperature status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-OPTICAL-MODULE-MIB::zxAnOpticalTransDistanceCopper OID value, configure state conditions and alerts, and monitor any ZTE access node (OLT/ONU with pluggable optical transceivers) (transceiver presence/DDM optical-power/temperature status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.30 | zxAnInterface | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.40 | zxAnOpticalModuleMib | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2 | zxAnOpticalModuleObjects | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4 | zxAnOpticalModuleInfoTable | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1 | zxAnOpticalModuleInfoEntry | ZTE-AN-OPTICAL-MODULE-MIB |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.45 | zxAnOpticalTransDistanceCopper | ZTE-AN-OPTICAL-MODULE-MIB |