All MIBs › XYPLEX-IEEE-HUB-MIB › hubExecutingSelfTest
hubExecutingSelfTest
Module: XYPLEX-IEEE-HUB-MIB
OID (symbolic): XYPLEX-IEEE-HUB-MIB::hubExecutingSelfTest
OID (numeric): 1.3.6.1.4.1.33.10001.2.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Control to cause execution of a non-disruptive self test.
What is hubExecutingSelfTest?
Setting this to selfTesting triggers the hub to run a non-disruptive self test, letting an admin verify hub hardware health without taking ports out of service.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.33.10001.2.1.1.8 snmpwalk -v2c -c public <target> XYPLEX-IEEE-HUB-MIB::hubExecutingSelfTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.33.10001.2.1.1.8.1 snmpget -v2c -c public <target> XYPLEX-IEEE-HUB-MIB::hubExecutingSelfTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.33.10001.2.1.1.8.1 i <value>
Start monitoring Xyplex repeaters/hubs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYPLEX-IEEE-HUB-MIB::hubExecutingSelfTest OID value, configure state conditions and alerts, and monitor any Xyplex repeaters/hubs from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.33 | xyplex | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.33.10001 | ieeeHub | XYPLEX-IEEE-HUB-MIB |
| 1.3.6.1.4.1.33.10001.2 | hmSelfTestCapability | XYPLEX-IEEE-HUB-MIB |
| 1.3.6.1.4.1.33.10001.2.1 | hmSelfTestHubTable | XYPLEX-IEEE-HUB-MIB |
| 1.3.6.1.4.1.33.10001.2.1.1 | hmSelfTestHubEntry | XYPLEX-IEEE-HUB-MIB |
| 1.3.6.1.4.1.33.10001.2.1.1.8 | hubExecutingSelfTest | XYPLEX-IEEE-HUB-MIB |