All MIBs › XYLAN-BACKUP-MIB › backupxConfigStartupTimeout
backupxConfigStartupTimeout
Module: XYLAN-BACKUP-MIB
OID (symbolic): XYLAN-BACKUP-MIB::backupxConfigStartupTimeout
OID (numeric): 1.3.6.1.4.1.800.2.16.1.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the time in seconds after system startup to wait for the Primary entity to come up before activating the backup entity.
What is backupxConfigStartupTimeout?
This read-write object sets the number of seconds after system startup that the device waits for the primary entity to come up before activating the backup path. Admins tune it to avoid premature failover to the backup during a normal, slightly slow boot sequence where the primary link simply hasn't come up yet. Setting backupxConfigStartupTimeout to 60 gives the primary port or PVC a full minute after boot to establish before the device falls back to the configured PPP peer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.16.1.1.1.12 snmpwalk -v2c -c public <target> XYLAN-BACKUP-MIB::backupxConfigStartupTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.16.1.1.1.12.1 snmpget -v2c -c public <target> XYLAN-BACKUP-MIB::backupxConfigStartupTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.16.1.1.1.12.1 i <value>
Start monitoring Xylan OmniSwitch LAN switch (primary/backup link failover status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-BACKUP-MIB::backupxConfigStartupTimeout OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch LAN switch (primary/backup link failover status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.16 | xylanBackupArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.16.1 | backupxConfigGroup | XYLAN-BACKUP-MIB |
| 1.3.6.1.4.1.800.2.16.1.1 | backupxConfigTable | XYLAN-BACKUP-MIB |
| 1.3.6.1.4.1.800.2.16.1.1.1 | backupxConfigEntry | XYLAN-BACKUP-MIB |
| 1.3.6.1.4.1.800.2.16.1.1.1.12 | backupxConfigStartupTimeout | XYLAN-BACKUP-MIB |