All MIBs › XYLAN-BACKUP-MIB › backupxConfigBackupType
backupxConfigBackupType
Module: XYLAN-BACKUP-MIB
OID (symbolic): XYLAN-BACKUP-MIB::backupxConfigBackupType
OID (numeric): 1.3.6.1.4.1.800.2.16.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the type of entity to use to back up the primary entity in case of failure.
What is backupxConfigBackupType?
This read-write object specifies the type of entity used to back up the primary in case of failure; the only defined value is pppPeer(1), meaning the backup is a PPP peer. It parallels backupxConfigPrimaryType but for the backup side, determining how backupxConfigBackupIndex1 through 3 should be interpreted. Since pppPeer(1) is currently the only supported backup type, an admin configuring any backup service must set backupxConfigBackupType to pppPeer(1) and then identify that peer via backupxConfigBackupIndex1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.16.1.1.1.8 snmpwalk -v2c -c public <target> XYLAN-BACKUP-MIB::backupxConfigBackupType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.16.1.1.1.8.1 snmpget -v2c -c public <target> XYLAN-BACKUP-MIB::backupxConfigBackupType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.16.1.1.1.8.1 i <value>
Start monitoring Xylan OmniSwitch LAN switch (primary/backup link failover status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-BACKUP-MIB::backupxConfigBackupType OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch LAN switch (primary/backup link failover status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.16 | xylanBackupArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.16.1 | backupxConfigGroup | XYLAN-BACKUP-MIB |
| 1.3.6.1.4.1.800.2.16.1.1 | backupxConfigTable | XYLAN-BACKUP-MIB |
| 1.3.6.1.4.1.800.2.16.1.1.1 | backupxConfigEntry | XYLAN-BACKUP-MIB |
| 1.3.6.1.4.1.800.2.16.1.1.1.8 | backupxConfigBackupType | XYLAN-BACKUP-MIB |