All MIBs › WWP-XCVR-MIB › wwpXcvrPortRedOrDiagMode
wwpXcvrPortRedOrDiagMode
Module: WWP-XCVR-MIB
OID (symbolic): WWP-XCVR-MIB::wwpXcvrPortRedOrDiagMode
OID (numeric): 1.3.6.1.4.1.6141.2.14.1.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object can be used to bring the Xcvr to the Manual mode. This also shows the port redundancy status for this logical port.
What is wwpXcvrPortRedOrDiagMode?
This enumerated value (enable or disable) both reports the port redundancy status for a logical port and can be used to force that port's transceiver selection into manual/diagnostic mode. An admin sets this to enable manual control over which transceiver in a redundant bank is active, for example during troubleshooting, rather than letting the automatic redundancy logic choose. For example, setting this to enable(1) puts the port's transceiver-bank switching into manual/diagnostic mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.14.1.1.2.1.3 snmpwalk -v2c -c public <target> WWP-XCVR-MIB::wwpXcvrPortRedOrDiagMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.14.1.1.2.1.3.1 snmpget -v2c -c public <target> WWP-XCVR-MIB::wwpXcvrPortRedOrDiagMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.14.1.1.2.1.3.1 i <value>
Start monitoring World Wide Packets Ethernet access/aggregation switches, pluggable optical/copper transceiver modules (Tx/Rx power/bias-current/temperature status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-XCVR-MIB::wwpXcvrPortRedOrDiagMode OID value, configure state conditions and alerts, and monitor any World Wide Packets Ethernet access/aggregation switches, pluggable optical/copper transceiver modules (Tx/Rx power/bias-current/temperature status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.14 | wwpXcvrMIB | WWP-XCVR-MIB |
| 1.3.6.1.4.1.6141.2.14.1 | wwpXcvrMIBObjects | WWP-XCVR-MIB |
| 1.3.6.1.4.1.6141.2.14.1.1 | wwpXcvr | WWP-XCVR-MIB |
| 1.3.6.1.4.1.6141.2.14.1.1.2 | wwpXcvrPortTable | WWP-XCVR-MIB |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1 | wwpXcvrPortEntry | WWP-XCVR-MIB |
| 1.3.6.1.4.1.6141.2.14.1.1.2.1.3 | wwpXcvrPortRedOrDiagMode | WWP-XCVR-MIB |