All MIBs › WWP-PHYSICAL-MODULE-MIB › wwpPhyModRebootOperation
wwpPhyModRebootOperation
Module: WWP-PHYSICAL-MODULE-MIB
OID (symbolic): WWP-PHYSICAL-MODULE-MIB::wwpPhyModRebootOperation
OID (numeric): 1.3.6.1.4.1.6141.2.3.1.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Writing one of the specified values to this field causes the specified type of reboot to occur.
none is the value returned when this leaf is queried. writing this value to the leaf will have no effect.
reboot causes the sytsem to reboot and restart using its current configuration.
rebootReinit causes the module to remove all its configuration and application files and get new files and configuration via bootp/dhcp.
rebootDefault will reset the system to factory defaults.
If the system doesn't support any of these reboot option, it should return error while trying to set this object to specific option.
What is wwpPhyModRebootOperation?
Triggers a specific type of reboot when set: a normal restart with current configuration, a reinitializing restart that wipes configuration and re-fetches it via BOOTP/DHCP, or a full factory-default reset. Reading this object always returns none(0), since it's a write-triggered action rather than a stored state, and writing none has no effect. An admin needing to wipe a misconfigured module and re-provision it from a DHCP/BOOTP server would set this to rebootReinit(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.3.1.2.1 snmpwalk -v2c -c public <target> WWP-PHYSICAL-MODULE-MIB::wwpPhyModRebootOperation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.3.1.2.1.1 snmpget -v2c -c public <target> WWP-PHYSICAL-MODULE-MIB::wwpPhyModRebootOperation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.3.1.2.1.1 i <value>
Start monitoring World Wide Packets Ethernet/optical transport platform (per-module serial-number/firmware-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-PHYSICAL-MODULE-MIB::wwpPhyModRebootOperation OID value, configure state conditions and alerts, and monitor any World Wide Packets Ethernet/optical transport platform (per-module serial-number/firmware-version status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.3 | wwpPhyModuleMIB | WWP-PHYSICAL-MODULE-MIB |
| 1.3.6.1.4.1.6141.2.3.1 | wwpPhyModuleMIBObjects | WWP-PHYSICAL-MODULE-MIB |
| 1.3.6.1.4.1.6141.2.3.1.2 | wwpPhyModuleRebootAttr | WWP-PHYSICAL-MODULE-MIB |
| 1.3.6.1.4.1.6141.2.3.1.2.1 | wwpPhyModRebootOperation | WWP-PHYSICAL-MODULE-MIB |