All MIBs › WWP-IP-INTERFACE-MIB › wwpIpInterfaceVlanId
wwpIpInterfaceVlanId
Module: WWP-IP-INTERFACE-MIB
OID (symbolic): WWP-IP-INTERFACE-MIB::wwpIpInterfaceVlanId
OID (numeric): 1.3.6.1.4.1.6141.2.17.1.1.2.1.2
Node type: OBJECT-TYPE
Type: VlanId
Access: read-write
Description: The vlanId associated with this IP interface. The vlan indicated by wwpIpInterfaceVlanId should exist in the Vlan Table. If an interface has no vlan assocaited, then any read on this object should return 'noSuchInstance'.
What is wwpIpInterfaceVlanId?
This object holds the VLAN ID associated with this IP interface, which per the source description must correspond to an existing entry in the VLAN table, and reading this object on an interface with no associated VLAN returns noSuchInstance. Admins set this to bind a Layer 3 IP interface to a specific VLAN for routed inter-VLAN traffic. Setting wwpIpInterfaceVlanId to 50 associates this IP interface with VLAN 50, provided VLAN 50 already exists in the VLAN table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.17.1.1.2.1.2 snmpwalk -v2c -c public <target> WWP-IP-INTERFACE-MIB::wwpIpInterfaceVlanId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.17.1.1.2.1.2.1 snmpget -v2c -c public <target> WWP-IP-INTERFACE-MIB::wwpIpInterfaceVlanId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.17.1.1.2.1.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wwpIpInterfaceVlanId.1
Start monitoring Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (IP-interface address/gateway config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-IP-INTERFACE-MIB::wwpIpInterfaceVlanId OID value, configure state conditions and alerts, and monitor any Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (IP-interface address/gateway config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.17 | wwpIpInterfaceMIB | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1 | wwpIpInterfaceMIBObjects | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1 | wwpIpInterface | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1.2 | wwpIpExtInterfaceTable | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1.2.1 | wwpIpExtInterfaceEntry | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1.2.1.2 | wwpIpInterfaceVlanId | WWP-IP-INTERFACE-MIB |