All MIBs › WWP-IP-INTERFACE-MIB › wwpIpInterfaceEnable
wwpIpInterfaceEnable
Module: WWP-IP-INTERFACE-MIB
OID (symbolic): WWP-IP-INTERFACE-MIB::wwpIpInterfaceEnable
OID (numeric): 1.3.6.1.4.1.6141.2.17.1.1.2.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The status of each interface. A value of true(1) indicates that this interface is enabled and a value of false(2) indicates that this interface is disabled. The device shouldn't allow the Management Station to disable all the interfaces available on the box.
What is wwpIpInterfaceEnable?
This object enables or disables a given interface: true(1) means enabled, false(2) means disabled, with the source description noting the device should not allow a management station to disable all interfaces on the box (which would cut off management access entirely). Admins use this to administratively shut down an interface that isn't in use or needs to be taken out of service. Setting wwpIpInterfaceEnable to false(2) on an unused interface disables it, though the device should refuse this action if it's the last remaining enabled interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.17.1.1.2.1.1 snmpwalk -v2c -c public <target> WWP-IP-INTERFACE-MIB::wwpIpInterfaceEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.17.1.1.2.1.1.1 snmpget -v2c -c public <target> WWP-IP-INTERFACE-MIB::wwpIpInterfaceEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.17.1.1.2.1.1.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wwpIpInterfaceEnable.1
Start monitoring Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (IP-interface address/gateway config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-IP-INTERFACE-MIB::wwpIpInterfaceEnable OID value, configure state conditions and alerts, and monitor any Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (IP-interface address/gateway config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.17 | wwpIpInterfaceMIB | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1 | wwpIpInterfaceMIBObjects | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1 | wwpIpInterface | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1.2 | wwpIpExtInterfaceTable | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1.2.1 | wwpIpExtInterfaceEntry | WWP-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.6141.2.17.1.1.2.1.1 | wwpIpInterfaceEnable | WWP-IP-INTERFACE-MIB |