All MIBs › WTI-POWER-MIB › alarmAlarmInput
alarmAlarmInput
Module: WTI-POWER-MIB
OID (symbolic): WTI-POWER-MIB::alarmAlarmInput
OID (numeric): 1.3.6.1.4.1.2634.3.280.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: State of the Alarm Input Alarm (0 = Inactive, 1 = Active)
What is alarmAlarmInput?
This reports whether the unit's dedicated alarm-input contact is currently active (1) or inactive (0), reflecting an external sensor or dry-contact device wired into the unit's alarm input. Admins use this to bring third-party sensors (like a door or water sensor) into the same alarm framework as the unit's own power alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2634.3.280.12 snmpwalk -v2c -c public <target> WTI-POWER-MIB::alarmAlarmInput
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2634.3.280.12.1 snmpget -v2c -c public <target> WTI-POWER-MIB::alarmAlarmInput.1
Start monitoring Western Telematic Inc. (WTI) power distribution unit / remote power controller (outlet status/current-draw/breaker status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WTI-POWER-MIB::alarmAlarmInput OID value, configure state conditions and alerts, and monitor any Western Telematic Inc. (WTI) power distribution unit / remote power controller (outlet status/current-draw/breaker status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2634 | westernTelematic | WTI-MPC-MIB |
| 1.3.6.1.4.1.2634.3 | wti | WTI-MPC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2634.3.280 | alarmTables | WTI-POWER-MIB |
| 1.3.6.1.4.1.2634.3.280.12 | alarmAlarmInput | WTI-POWER-MIB |