WRI-TEMPERATURE-MIB :: temperatureTrapEna

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WRI-TEMPERATURE-MIB › temperatureTrapEna

temperatureTrapEna

Module: WRI-TEMPERATURE-MIB

OID (symbolic): WRI-TEMPERATURE-MIB::temperatureTrapEna

OID (numeric): 1.3.6.1.4.1.3807.1.8012.1.6.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enable temperature trap or not.

What is temperatureTrapEna?

This read-write enumerated value turns temperature trap notifications on or off for this specific sensor entry in the temperature table, with enable(1) allowing traps and disable(2) suppressing them. An admin uses it to control alerting on a per-sensor basis, unlike the device-wide temperatureTrapEnable, so a single noisy or non-critical sensor can be muted without disabling traps everywhere. An admin might set temperatureTrapEna to disable(2) for a sensor known to read erratically, while leaving trapping enabled on all other sensors.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3807.1.8012.1.6.2.1.7
snmpwalk -v2c -c public <target> WRI-TEMPERATURE-MIB::temperatureTrapEna

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3807.1.8012.1.6.2.1.7.1
snmpget -v2c -c public <target> WRI-TEMPERATURE-MIB::temperatureTrapEna.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3807.1.8012.1.6.2.1.7.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> temperatureTrapEna.1

Start monitoring FiberHome Networks transport/access chassis (temperature-sensor/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WRI-TEMPERATURE-MIB::temperatureTrapEna OID value, configure state conditions and alerts, and monitor any FiberHome Networks transport/access chassis (temperature-sensor/threshold-alarm status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3807wriWRI-SMI
1.3.6.1.4.1.3807.1wriProductsWRI-SMI
1.3.6.1.4.1.3807.1.8012msppWRI-CPU-MIB
1.3.6.1.4.1.3807.1.8012.1msppChassisWRI-CPU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3807.1.8012.1.6msppTemperatureWRI-TEMPERATURE-MIB
1.3.6.1.4.1.3807.1.8012.1.6.2temperatureTableWRI-TEMPERATURE-MIB
1.3.6.1.4.1.3807.1.8012.1.6.2.1temperatureEntryWRI-TEMPERATURE-MIB
1.3.6.1.4.1.3807.1.8012.1.6.2.1.7temperatureTrapEnaWRI-TEMPERATURE-MIB