WIRELESS-INNOVATIONS-PRODUCTS-MIB :: alarmTrapCounter

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › WIRELESS-INNOVATIONS-PRODUCTS-MIB › alarmTrapCounter

alarmTrapCounter

Module: WIRELESS-INNOVATIONS-PRODUCTS-MIB

OID (symbolic): WIRELESS-INNOVATIONS-PRODUCTS-MIB::alarmTrapCounter

OID (numeric): 1.3.6.1.4.1.331.1.2.1.1.2.5

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This is the counter indicating how many total notifications have been sent from the device since last bootup (or reboot). The counter is included in every private/enterprise notification.

The counter starts at 0 on system bootup (or reboot). Upon wrapping, the counter starts at 1, not 0. Since the standard notifications ColdStart and WarmStart will be implemented, any boot (or reboot) sequence will trigger the following notification sequence: 1. ColdStart/WarmStart notification. 1a changedIPAddressEvent with counter = 0 if IP address has been changed during agent downtime. 1b swActivationProgress with counter + 1 resp. counter = 0 (depending on 1a was fired or not) if agent startup has triggert the activation of a new software package. Note: This is an optional notification, it depends on the agent implementation whether he is able to detect that the startup was triggert by the activation of a new software package or not. 2. agentUpAndRunningEvent with counter + 1 resp. counter = 0 (depending on 1a/1b was fired or not) if agent is finally up and running. 2a HeartBeat notification with counter + 1 if HeartBeat enabled. 3. alarm/other notifications with counter + 1 according to alarm/other conditions detected once the agent starts operating.

What is alarmTrapCounter?

Counts every private/enterprise notification the device has sent since its last boot, included in every trap so the manager can detect gaps or reboots (the counter restarts at 0 on boot and wraps to 1, not 0, when it overflows).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.331.1.2.1.1.2.5
snmpwalk -v2c -c public <target> WIRELESS-INNOVATIONS-PRODUCTS-MIB::alarmTrapCounter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.331.1.2.1.1.2.5.1
snmpget -v2c -c public <target> WIRELESS-INNOVATIONS-PRODUCTS-MIB::alarmTrapCounter.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> alarmTrapCounter.1

Start monitoring Wireless Innovations cellular distributed antenna system (DAS) equipment (base enterprise OID registration, no data objects) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIRELESS-INNOVATIONS-PRODUCTS-MIB::alarmTrapCounter OID value, configure state conditions and alerts, and monitor any Wireless Innovations cellular distributed antenna system (DAS) equipment (base enterprise OID registration, no data objects) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.331andrewANDREW-MIB
1.3.6.1.4.1.331.1andrewProductsANDREW-MIB
1.3.6.1.4.1.331.1.2wirelessInnovationsANDREW-MIB
Numeric OIDNameModule
1.3.6.1.4.1.331.1.2.1wirelessInnovationsProductsWIRELESS-INNOVATIONS-PRODUCTS-MIB
1.3.6.1.4.1.331.1.2.1.1commonDeviceObjectsWIRELESS-INNOVATIONS-PRODUCTS-MIB
1.3.6.1.4.1.331.1.2.1.1.2commonDeviceAlarmWIRELESS-INNOVATIONS-PRODUCTS-MIB
1.3.6.1.4.1.331.1.2.1.1.2.5alarmTrapCounterWIRELESS-INNOVATIONS-PRODUCTS-MIB