All MIBs › WIENER-CRATE-MIB › sysDebug
sysDebug
Module: WIENER-CRATE-MIB
OID (symbolic): WIENER-CRATE-MIB::sysDebug
OID (numeric): 1.3.6.1.4.1.19947.1.1.1027
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Debug communication with the MPOD. This is a direct map to the ancient functions which are accessible via USB (without SLIP/SNMP).
What is sysDebug?
Raw debug communication channel with the MPOD controller, described in the source MIB as a direct map to legacy functions normally reached over USB rather than SNMP/SLIP; intended for vendor diagnostics, not routine polling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.19947.1.1.1027 snmpwalk -v2c -c public <target> WIENER-CRATE-MIB::sysDebug
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.19947.1.1.1027.1 snmpget -v2c -c public <target> WIENER-CRATE-MIB::sysDebug.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.19947.1.1.1027.1 s <value>
Start monitoring W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIENER-CRATE-MIB::sysDebug OID value, configure state conditions and alerts, and monitor any W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.19947 | wiener | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1 | crate | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.1 | system | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.1.1027 | sysDebug | WIENER-CRATE-MIB |