All MIBs › WIENER-CRATE-MIB › outputTripActionMinSenseVoltage
outputTripActionMinSenseVoltage
Module: WIENER-CRATE-MIB
OID (symbolic): WIENER-CRATE-MIB::outputTripActionMinSenseVoltage
OID (numeric): 1.3.6.1.4.1.19947.1.3.2.1.47
Node type: OBJECT-TYPE
Type: OutputTripAction
Access: read-write
Description: Trip action if outputSuperisionMinSenseVoltage threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 0..1 of outputSupervisionBehavior.
What is outputTripActionMinSenseVoltage?
Configures what happens when the min-sense-voltage supervision limit is violated: on WIENER LV devices, options range from ignoring the failure up to shutting off the whole crate; on iseg HV devices the options instead range through ramping the channel down or an emergency-off up to shutting off the whole board, per the source description.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.19947.1.3.2.1.47 snmpwalk -v2c -c public <target> WIENER-CRATE-MIB::outputTripActionMinSenseVoltage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.19947.1.3.2.1.47.1 snmpget -v2c -c public <target> WIENER-CRATE-MIB::outputTripActionMinSenseVoltage.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.19947.1.3.2.1.47.1 s <value>
Start monitoring W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIENER-CRATE-MIB::outputTripActionMinSenseVoltage OID value, configure state conditions and alerts, and monitor any W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.19947 | wiener | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1 | crate | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.3 | output | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.3.2 | outputTable | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.3.2.1 | outputEntry | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.3.2.1.47 | outputTripActionMinSenseVoltage | WIENER-CRATE-MIB |