WIENER-CRATE-MIB :: outputGroup

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › WIENER-CRATE-MIB › outputGroup

outputGroup

Module: WIENER-CRATE-MIB

OID (symbolic): WIENER-CRATE-MIB::outputGroup

OID (numeric): 1.3.6.1.4.1.19947.1.3.2.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The group number (1...63) assigned to each channel. If commands shall be sent to all channels with a specific group number (e.g. with the groupsSwitch command defined below), additional bits can be added to the group number:

HLgggggg g: Group number (1...63) L: Mask bit: 1: high voltage channels only, no low voltage channels H: Mask bit: 1: low voltage channels only, no high voltage channels

Special groups: 0: all (LV+HV) channels 0x40: all, but no LV channels 0x80: all, but no HV channels

What is outputGroup?

The group number (1-63) this channel is assigned to; per the source description extra high bits can restrict a group command to only the HV or only the LV channels within that group, letting an admin batch-switch a subset of channels with one write.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.19947.1.3.2.1.3
snmpwalk -v2c -c public <target> WIENER-CRATE-MIB::outputGroup

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.19947.1.3.2.1.3.1
snmpget -v2c -c public <target> WIENER-CRATE-MIB::outputGroup.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.19947.1.3.2.1.3.1 i <value>

Start monitoring W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIENER-CRATE-MIB::outputGroup OID value, configure state conditions and alerts, and monitor any W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.19947wienerWIENER-CRATE-MIB
1.3.6.1.4.1.19947.1crateWIENER-CRATE-MIB
1.3.6.1.4.1.19947.1.3outputWIENER-CRATE-MIB
1.3.6.1.4.1.19947.1.3.2outputTableWIENER-CRATE-MIB
1.3.6.1.4.1.19947.1.3.2.1outputEntryWIENER-CRATE-MIB
1.3.6.1.4.1.19947.1.3.2.1.3outputGroupWIENER-CRATE-MIB