All MIBs › WIENER-CRATE-MIB › canTransmitHv
canTransmitHv
Module: WIENER-CRATE-MIB
OID (symbolic): WIENER-CRATE-MIB::canTransmitHv
OID (numeric): 1.3.6.1.4.1.19947.1.5.2.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Control of the internal HV CAN-Bus on the backplane. A write access with: CANID=0x600 DLC=4 DATAID=0x1001 CONTROL will switch the HV modules into a special state. CONTROL=0x0001 - enable SNMP CAN access, stop the refresh cycle for the data points of the name space CONTROL=0x0002 - disable SNMP CAN access, activate the refresh cycle for the data points of the name space A write access unequal to CANID=0x600 will be transmitted to the HV CAN on the backplane. Such a message will be transmitted immediately via the CAN interface. The OCTET STRING data is formatted according to the CANviaSNMP structure.
What is canTransmitHv?
Writes to the internal HV backplane CAN-bus; per the source description a specific control write (CANID 0x600, DATAID 0x1001) can switch the HV modules between SNMP-CAN access mode and their normal refresh-cycle mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.19947.1.5.2.5 snmpwalk -v2c -c public <target> WIENER-CRATE-MIB::canTransmitHv
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.19947.1.5.2.5.1 snmpget -v2c -c public <target> WIENER-CRATE-MIB::canTransmitHv.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.19947.1.5.2.5.1 s <value>
Start monitoring W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WIENER-CRATE-MIB::canTransmitHv OID value, configure state conditions and alerts, and monitor any W-IE-NE-R VME/NIM crate power supply mainframe (channel voltage/current/temperature/fault status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.19947 | wiener | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1 | crate | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.5 | communication | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.5.2 | can | WIENER-CRATE-MIB |
| 1.3.6.1.4.1.19947.1.5.2.5 | canTransmitHv | WIENER-CRATE-MIB |