WATCHGUARD-IPSEC-SA-MON-MIB-EXT :: wgIpsecSaIpcompOutAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WATCHGUARD-IPSEC-SA-MON-MIB-EXT › wgIpsecSaIpcompOutAddress

wgIpsecSaIpcompOutAddress

Module: WATCHGUARD-IPSEC-SA-MON-MIB-EXT

OID (symbolic): WATCHGUARD-IPSEC-SA-MON-MIB-EXT::wgIpsecSaIpcompOutAddress

OID (numeric): 1.3.6.1.4.1.3097.3.1.1.6.1.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: The destination address of the SA.

If the IPCOMP SA is shared across multiple SAs in protection suites, this value may be 0.

For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA].

Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes.

What is wgIpsecSaIpcompOutAddress?

The destination (remote peer) address of this outbound IPComp compression SA, which may read as 0 if the SA is shared across multiple protection-suite SAs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3097.3.1.1.6.1.1
snmpwalk -v2c -c public <target> WATCHGUARD-IPSEC-SA-MON-MIB-EXT::wgIpsecSaIpcompOutAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3097.3.1.1.6.1.1.1
snmpget -v2c -c public <target> WATCHGUARD-IPSEC-SA-MON-MIB-EXT::wgIpsecSaIpcompOutAddress.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wgIpsecSaIpcompOutAddress.1

Start monitoring WatchGuard firewall/UTM appliance (IPsec tunnel rekey/lifetime status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WATCHGUARD-IPSEC-SA-MON-MIB-EXT::wgIpsecSaIpcompOutAddress OID value, configure state conditions and alerts, and monitor any WatchGuard firewall/UTM appliance (IPsec tunnel rekey/lifetime status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3097watchguardWATCHGUARD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3097.3wgIpsecSaMonModuleWATCHGUARD-IPSEC-SA-MON-MIB-EXT
1.3.6.1.4.1.3097.3.1wgIpsecSaMonitorMIBWATCHGUARD-IPSEC-SA-MON-MIB-EXT
1.3.6.1.4.1.3097.3.1.1wgSaTablesWATCHGUARD-IPSEC-SA-MON-MIB-EXT
1.3.6.1.4.1.3097.3.1.1.6wgIpsecSaIpcompOutTableWATCHGUARD-IPSEC-SA-MON-MIB-EXT
1.3.6.1.4.1.3097.3.1.1.6.1wgIpsecSaIpcompOutEntryWATCHGUARD-IPSEC-SA-MON-MIB-EXT
1.3.6.1.4.1.3097.3.1.1.6.1.1wgIpsecSaIpcompOutAddressWATCHGUARD-IPSEC-SA-MON-MIB-EXT