VPNPOLICY-MIB :: vpTestPolIngressAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVPNPOLICY-MIBvpTestPolIngressAddr

vpTestPolIngressAddr

Module: VPNPOLICY-MIB

OID (symbolic): VPNPOLICY-MIB::vpTestPolIngressAddr

OID (numeric): 1.3.6.1.4.1.2.6.119.4.15.5.1.1.8

Node type: OBJECT-TYPE

Type: VpIpAddress

Access: read-write

Description: The IP address of the device interface which received the packet.

An IP address of 0.0.0.0 should be used to test policies which do NOT have Ingress/Egress interface definitions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.15.5.1.1.8
snmpwalk -v2c -c public <target> VPNPOLICY-MIB::vpTestPolIngressAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.15.5.1.1.8.1
snmpget -v2c -c public <target> VPNPOLICY-MIB::vpTestPolIngressAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.119.4.15.5.1.1.8.1 a <value>

Start monitoring VPN gateway or firewall appliance (access-control/routing/filter policy config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VPNPOLICY-MIB::vpTestPolIngressAddr OID value, configure state conditions and alerts, and monitor any VPN gateway or firewall appliance (access-control/routing/filter policy config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.6ibmProdIBM-6611-APPN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.119.4.15ibmIROCVPNpolicyVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5vpTestsVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5.1vpTestPolicyTableVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5.1.1vpTestPolicyEntryVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5.1.1.8vpTestPolIngressAddrVPNPOLICY-MIB