VPNPOLICY-MIB :: vpTestPolEgressAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVPNPOLICY-MIBvpTestPolEgressAddr

vpTestPolEgressAddr

Module: VPNPOLICY-MIB

OID (symbolic): VPNPOLICY-MIB::vpTestPolEgressAddr

OID (numeric): 1.3.6.1.4.1.2.6.119.4.15.5.1.1.9

Node type: OBJECT-TYPE

Type: VpIpAddress

Access: read-write

Description: The IP address of the device interface which will be used to send the packet.

An IP address of 0.0.0.0 should be used to test policies which do NOT have Ingress/Egress interface definitions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.15.5.1.1.9
snmpwalk -v2c -c public <target> VPNPOLICY-MIB::vpTestPolEgressAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.15.5.1.1.9.1
snmpget -v2c -c public <target> VPNPOLICY-MIB::vpTestPolEgressAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.119.4.15.5.1.1.9.1 a <value>

Start monitoring VPN gateway or firewall appliance (access-control/routing/filter policy config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VPNPOLICY-MIB::vpTestPolEgressAddr OID value, configure state conditions and alerts, and monitor any VPN gateway or firewall appliance (access-control/routing/filter policy config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.6ibmProdIBM-6611-APPN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.119.4.15ibmIROCVPNpolicyVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5vpTestsVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5.1vpTestPolicyTableVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5.1.1vpTestPolicyEntryVPNPOLICY-MIB
1.3.6.1.4.1.2.6.119.4.15.5.1.1.9vpTestPolEgressAddrVPNPOLICY-MIB