VIPTELA-DOT1X :: dot1xRadiusIsPrimary

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVIPTELA-DOT1Xdot1xRadiusIsPrimary

dot1xRadiusIsPrimary

Module: VIPTELA-DOT1X

OID (symbolic): VIPTELA-DOT1X::dot1xRadiusIsPrimary

OID (numeric): 1.3.6.1.4.1.41916.19.1.3.1.4

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: RADIUS server is configured to be the primary one

What is dot1xRadiusIsPrimary?

This read-only value reports whether this RADIUS server entry is configured as the primary server for the interface. An admin auditing failover behavior checks this alongside dot1xRadiusAuthIsCurrent to see whether the device has fallen over to a secondary server.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.41916.19.1.3.1.4
snmpwalk -v2c -c public <target> VIPTELA-DOT1X::dot1xRadiusIsPrimary

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.41916.19.1.3.1.4.1
snmpget -v2c -c public <target> VIPTELA-DOT1X::dot1xRadiusIsPrimary.1

Start monitoring Viptela/Cisco SD-WAN edge routers/switches (802.1X port-authentication operational state status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VIPTELA-DOT1X::dot1xRadiusIsPrimary OID value, configure state conditions and alerts, and monitor any Viptela/Cisco SD-WAN edge routers/switches (802.1X port-authentication operational state status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.41916viptelaVIPTELA-GLOBAL
Numeric OIDNameModule
1.3.6.1.4.1.41916.19viptela_dot1xVIPTELA-DOT1X
1.3.6.1.4.1.41916.19.1dot1xVIPTELA-DOT1X
1.3.6.1.4.1.41916.19.1.3dot1xRadiusTableVIPTELA-DOT1X
1.3.6.1.4.1.41916.19.1.3.1dot1xRadiusEntryVIPTELA-DOT1X
1.3.6.1.4.1.41916.19.1.3.1.4dot1xRadiusIsPrimaryVIPTELA-DOT1X