VDSL-LINE-EXT-SCM-MIB :: vdslLineSCMPhysBandCurrAtn

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › VDSL-LINE-EXT-SCM-MIB › vdslLineSCMPhysBandCurrAtn

vdslLineSCMPhysBandCurrAtn

Module: VDSL-LINE-EXT-SCM-MIB

OID (symbolic): VDSL-LINE-EXT-SCM-MIB::vdslLineSCMPhysBandCurrAtn

OID (numeric): 1.3.6.1.2.1.10.228.1.1.2.1.8

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Measured difference in the total power transmitted by the peer Vtu on this band and the total power received by this Vtu on this band in 0.25 dB.

What is vdslLineSCMPhysBandCurrAtn?

This read-only value, in units of 0.25 dB and ranging from 0 to 255, reports the measured difference between the total power the peer transceiver transmitted on this band and the total power this transceiver received on it, essentially the attenuation for that band. Admins monitor it to gauge line loss on this specific frequency band, useful for diagnosing loop length or cable quality issues. For example, a high vdslLineSCMPhysBandCurrAtn value on a particular band suggests significant signal loss for that frequency range, consistent with a long or poor-quality copper loop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.228.1.1.2.1.8
snmpwalk -v2c -c public <target> VDSL-LINE-EXT-SCM-MIB::vdslLineSCMPhysBandCurrAtn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.228.1.1.2.1.8.1
snmpget -v2c -c public <target> VDSL-LINE-EXT-SCM-MIB::vdslLineSCMPhysBandCurrAtn.1

Start monitoring VDSL access equipment, SCM line coding (band-parameter/SNR-margin status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VDSL-LINE-EXT-SCM-MIB::vdslLineSCMPhysBandCurrAtn OID value, configure state conditions and alerts, and monitor any VDSL access equipment, SCM line coding (band-parameter/SNR-margin status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.228vdslExtSCMMIBVDSL-LINE-EXT-SCM-MIB
1.3.6.1.2.1.10.228.1vdslLineExtSCMMibVDSL-LINE-EXT-SCM-MIB
1.3.6.1.2.1.10.228.1.1vdslLineExtSCMMibObjectsVDSL-LINE-EXT-SCM-MIB
1.3.6.1.2.1.10.228.1.1.2vdslLineSCMPhysBandTableVDSL-LINE-EXT-SCM-MIB
1.3.6.1.2.1.10.228.1.1.2.1vdslLineSCMPhysBandEntryVDSL-LINE-EXT-SCM-MIB
1.3.6.1.2.1.10.228.1.1.2.1.8vdslLineSCMPhysBandCurrAtnVDSL-LINE-EXT-SCM-MIB