All MIBs › Usr-Dhcp-MIB › usrDhcpAutoSeed
usrDhcpAutoSeed
Module: Usr-Dhcp-MIB
OID (symbolic): Usr-Dhcp-MIB::usrDhcpAutoSeed
OID (numeric): 1.3.6.1.4.1.429.4.59.14.1.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: Initial seed address. Default 10.0.0.1
What is usrDhcpAutoSeed?
The starting IP address (default 10.0.0.1) that this automatic address-allocation range begins counting from when handing out addresses to DHCP clients.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.59.14.1.2 snmpwalk -v2c -c public <target> Usr-Dhcp-MIB::usrDhcpAutoSeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.59.14.1.2.1 snmpget -v2c -c public <target> Usr-Dhcp-MIB::usrDhcpAutoSeed.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.59.14.1.2.1 a <value>
Start monitoring CommWorks/3Com broadband/remote-access equipment (DHCP pool/lease/relay status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Usr-Dhcp-MIB::usrDhcpAutoSeed OID value, configure state conditions and alerts, and monitor any CommWorks/3Com broadband/remote-access equipment (DHCP pool/lease/relay status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | CHS-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.59 | usrDhcp | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.59.14 | usrDhcpAutoTable | Usr-Dhcp-MIB |
| 1.3.6.1.4.1.429.4.59.14.1 | usrDhcpAutoEntry | Usr-Dhcp-MIB |
| 1.3.6.1.4.1.429.4.59.14.1.2 | usrDhcpAutoSeed | Usr-Dhcp-MIB |