All MIBs › Unisphere-Data-SLEP-MIB › usdSlepNextIfIndex
usdSlepNextIfIndex
Module: Unisphere-Data-SLEP-MIB
OID (symbolic): Unisphere-Data-SLEP-MIB::usdSlepNextIfIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.15.1.1.1
Node type: OBJECT-TYPE
Type: UsdNextIfIndex
Access: read-only
Description: Coordinate ifIndex value allocation for entries in usdSlepIfTable.
A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
What is usdSlepNextIfIndex?
This read-only object returns the next available ifIndex value to use when creating a new entry in the SLEP interface table, or zero if none is available; it also returns zero when read as part of a GETNEXT/GETBULK walk rather than a deliberate GET. A management application GETs this immediately before creating a new SLEP interface, since successive GETs typically return different values to avoid collisions between multiple managers creating interfaces simultaneously. For example, a manager GETs this object, receives ifIndex 12, and then uses 12 as the usdSlepIfIndex when creating the new interface row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.15.1.1.1 snmpwalk -v2c -c public <target> Unisphere-Data-SLEP-MIB::usdSlepNextIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.15.1.1.1.1 snmpget -v2c -c public <target> Unisphere-Data-SLEP-MIB::usdSlepNextIfIndex.1
Start monitoring Juniper/Unisphere ERX Edge Router, serial WAN interface module (keepalive/loopback-detection status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-SLEP-MIB::usdSlepNextIfIndex OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router, serial WAN interface module (keepalive/loopback-detection status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.15 | juniSlepMIBS | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.15.1 | juniSlepObjects | Juniper-SLEP-MIB |
| 1.3.6.1.4.1.4874.2.2.15.1.1 | juniSlepIfLayer | Juniper-SLEP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.15.1.1.1 | usdSlepNextIfIndex | Unisphere-Data-SLEP-MIB |