All MIBs › Unisphere-Data-SLEP-MIB › usdSlepLinkStatusTooLongPackets
usdSlepLinkStatusTooLongPackets
Module: Unisphere-Data-SLEP-MIB
OID (symbolic): Unisphere-Data-SLEP-MIB::usdSlepLinkStatusTooLongPackets
OID (numeric): 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of packets that were too long for this SLEP entity.
What is usdSlepLinkStatusTooLongPackets?
This Counter32 counts the number of packets received on this SLEP interface that were too long (oversized) for the SLEP entity to accept. An admin checks this to identify a peer or upstream device sending frames larger than the SLEP link can handle, a common cause of unexplained drops. A steadily increasing count suggests a device on the far end is sending oversized frames that this SLEP interface is rejecting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3 snmpwalk -v2c -c public <target> Unisphere-Data-SLEP-MIB::usdSlepLinkStatusTooLongPackets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3.1 snmpget -v2c -c public <target> Unisphere-Data-SLEP-MIB::usdSlepLinkStatusTooLongPackets.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usdSlepLinkStatusTooLongPackets.1
Start monitoring Juniper/Unisphere ERX Edge Router, serial WAN interface module (keepalive/loopback-detection status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-SLEP-MIB::usdSlepLinkStatusTooLongPackets OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router, serial WAN interface module (keepalive/loopback-detection status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.15 | juniSlepMIBS | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.15.1 | juniSlepObjects | Juniper-SLEP-MIB |
| 1.3.6.1.4.1.4874.2.2.15.1.1 | juniSlepIfLayer | Juniper-SLEP-MIB |
| 1.3.6.1.4.1.4874.2.2.15.1.1.3 | juniSlepIfStatisticsTable | Juniper-SLEP-MIB |
| 1.3.6.1.4.1.4874.2.2.15.1.1.3.1 | juniSlepIfStatisticsEntry | Juniper-SLEP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3 | usdSlepLinkStatusTooLongPackets | Unisphere-Data-SLEP-MIB |