All MIBs › Unisphere-Data-L2F-MIB › usdL2fTunnelStatusRemoteHostName
usdL2fTunnelStatusRemoteHostName
Module: Unisphere-Data-L2F-MIB
OID (symbolic): Unisphere-Data-L2F-MIB::usdL2fTunnelStatusRemoteHostName
OID (numeric): 1.3.6.1.4.1.4874.2.2.53.1.3.2.1.1.8
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2F peer. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero-length string if no name was previously known.
What is usdL2fTunnelStatusRemoteHostName?
The host name the remote L2F peer presented (via the Host Name AVP) during tunnel establishment; if the tunnel is idle, it retains the last known name, or is empty if none was ever learned. It's a human-readable identity for the peer at the other end of this tunnel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.3.2.1.1.8 snmpwalk -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fTunnelStatusRemoteHostName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.3.2.1.1.8.1 snmpget -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fTunnelStatusRemoteHostName.1
Start monitoring Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-L2F-MIB::usdL2fTunnelStatusRemoteHostName OID value, configure state conditions and alerts, and monitor any Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.53 | juniL2fMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.53.1 | usdL2fObjects | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.3 | usdL2fTunnel | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.3.2 | usdL2fTunnelStatus | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.3.2.1 | usdL2fTunnelStatusTable | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.3.2.1.1 | usdL2fTunnelStatusEntry | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.3.2.1.1.8 | usdL2fTunnelStatusRemoteHostName | Unisphere-Data-L2F-MIB |