All MIBs › Unisphere-Data-L2F-MIB › usdL2fSysConfigReceiveDataSequencingIgnore
usdL2fSysConfigReceiveDataSequencingIgnore
Module: Unisphere-Data-L2F-MIB
OID (symbolic): Unisphere-Data-L2F-MIB::usdL2fSysConfigReceiveDataSequencingIgnore
OID (numeric): 1.3.6.1.4.1.4874.2.2.53.1.1.1.4
Node type: OBJECT-TYPE
Type: UsdEnable
Access: read-write
Description: Enable/disable ignoring of receive sequencing of L2F data packets.
What is usdL2fSysConfigReceiveDataSequencingIgnore?
Enables or disables ignoring the sequence numbers on received L2F data packets. Enabling it lets out-of-order payload packets be accepted and processed rather than dropped or reordered.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.1.1.4 snmpwalk -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fSysConfigReceiveDataSequencingIgnore
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.1.1.4.1 snmpget -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fSysConfigReceiveDataSequencingIgnore.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.53.1.1.1.4.1 s <value>
Start monitoring Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-L2F-MIB::usdL2fSysConfigReceiveDataSequencingIgnore OID value, configure state conditions and alerts, and monitor any Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.53 | juniL2fMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.53.1 | usdL2fObjects | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.1 | usdL2fSystem | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.1.1 | usdL2fSystemConfig | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.1.1.4 | usdL2fSysConfigReceiveDataSequencingIgnore | Unisphere-Data-L2F-MIB |