All MIBs › Unisphere-Data-L2F-MIB › usdL2fSessionStatusCallType
usdL2fSessionStatusCallType
Module: Unisphere-Data-L2F-MIB
OID (symbolic): Unisphere-Data-L2F-MIB::usdL2fSessionStatusCallType
OID (numeric): 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The type of call and role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.
What is usdL2fSessionStatusCallType?
Describes the type of call and the role this tunnel peer is playing for the session, e.g. lacIncoming indicates this peer acted as a LAC and sent an Incoming-Call-Request to the LNS peer. Since a peer can act as both LAC and LNS at once, this field is checked per-session rather than assumed from the device's general role.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.7 snmpwalk -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fSessionStatusCallType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.7.1 snmpget -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fSessionStatusCallType.1
Start monitoring Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-L2F-MIB::usdL2fSessionStatusCallType OID value, configure state conditions and alerts, and monitor any Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.53 | juniL2fMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.53.1 | usdL2fObjects | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4 | usdL2fSession | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2 | usdL2fSessionStatus | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2.1 | usdL2fSessionStatusTable | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1 | usdL2fSessionStatusEntry | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.7 | usdL2fSessionStatusCallType | Unisphere-Data-L2F-MIB |