All MIBs › Unisphere-Data-L2F-MIB › usdL2fSessionStatusAuthMethod
usdL2fSessionStatusAuthMethod
Module: Unisphere-Data-L2F-MIB
OID (symbolic): Unisphere-Data-L2F-MIB::usdL2fSessionStatusAuthMethod
OID (numeric): 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The proxy authentication method employed by the LAC for the session. If usdL2fSessionProxyLcp is false(2) this object reports a value of 'none' and should be ignored.
What is usdL2fSessionStatusAuthMethod?
The proxy authentication method the LAC used for this session: none, PPP CHAP, PPP PAP, or PPP MS-CHAP; if usdL2fSessionStatusProxyLcp is false, this reports 'none' and should be disregarded. It tells the LNS side what credential exchange, if any, already took place at the LAC before the session was tunneled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.11 snmpwalk -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fSessionStatusAuthMethod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.11.1 snmpget -v2c -c public <target> Unisphere-Data-L2F-MIB::usdL2fSessionStatusAuthMethod.1
Start monitoring Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-L2F-MIB::usdL2fSessionStatusAuthMethod OID value, configure state conditions and alerts, and monitor any Unisphere Networks ERX router, Juniper ERX edge router (L2F tunnel state/firmware-revision status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.53 | juniL2fMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.53.1 | usdL2fObjects | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4 | usdL2fSession | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2 | usdL2fSessionStatus | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2.1 | usdL2fSessionStatusTable | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1 | usdL2fSessionStatusEntry | Unisphere-Data-L2F-MIB |
| 1.3.6.1.4.1.4874.2.2.53.1.4.2.1.1.11 | usdL2fSessionStatusAuthMethod | Unisphere-Data-L2F-MIB |