All MIBs › Unisphere-Data-IP-POLICY-MIB › usdIpRouteMapDisplay
usdIpRouteMapDisplay
Module: Unisphere-Data-IP-POLICY-MIB
OID (symbolic): Unisphere-Data-IP-POLICY-MIB::usdIpRouteMapDisplay
OID (numeric): 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Textual information taken from the NVT ASCII character set (i.e. RFC1903 DisplayString), but with increased length. The information in this object is the series of set, match, and/or match & set clauses for this route map.
It is assumed that the information conveyed in this object is used for display purposes and in general, is not parsed. The information in this string is a concatentation of routemap clauses configured via the systems non SNMP interface.
What is usdIpRouteMapDisplay?
A read-only text string, up to 2048 characters, holding the concatenated set/match/match-and-set clauses of this route map exactly as configured through the device's non-SNMP interface, intended for display rather than parsing. Admins read this to see the full human-readable route-map logic (e.g. match conditions and the actions taken) for a given clause without needing CLI access.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.7 snmpwalk -v2c -c public <target> Unisphere-Data-IP-POLICY-MIB::usdIpRouteMapDisplay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.7.1 snmpget -v2c -c public <target> Unisphere-Data-IP-POLICY-MIB::usdIpRouteMapDisplay.1
Start monitoring Juniper/Unisphere ERX Edge Router (ACL/route-policy rule config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-IP-POLICY-MIB::usdIpRouteMapDisplay OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX Edge Router (ACL/route-policy rule config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.13 | juniIpPolicyMIB | Juniper-IP-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.13.1 | juniIpPolicyObjects | Juniper-IP-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.13.1.8 | juniIpRouteMapTree | Juniper-IP-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.13.1.8.1 | juniIpRouteMapTable | Juniper-IP-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.13.1.8.1.1 | juniIpRouteMapEntry | Juniper-IP-POLICY-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.13.1.8.1.1.7 | usdIpRouteMapDisplay | Unisphere-Data-IP-POLICY-MIB |