All MIBs › Unisphere-Data-ETHERNET-MIB › usdEthernetIfOperDuplexMode
usdEthernetIfOperDuplexMode
Module: Unisphere-Data-ETHERNET-MIB
OID (symbolic): Unisphere-Data-ETHERNET-MIB::usdEthernetIfOperDuplexMode
OID (numeric): 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current operational duplex mode for this ethernet interface.
What is usdEthernetIfOperDuplexMode?
This read-only object reports the current operational duplex mode -- autoDuplex, halfDuplex, or fullDuplex -- actually in effect on an Ethernet interface, as distinct from the read-write usdEthernetIfDuplexMode configuration object for the same interface. It reflects the outcome of autonegotiation (or forced settings) rather than what was requested. An admin polls this object to confirm whether a link actually came up full duplex as intended, or to spot a duplex mismatch when troubleshooting poor throughput.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5 snmpwalk -v2c -c public <target> Unisphere-Data-ETHERNET-MIB::usdEthernetIfOperDuplexMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5.1 snmpget -v2c -c public <target> Unisphere-Data-ETHERNET-MIB::usdEthernetIfOperDuplexMode.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usdEthernetIfOperDuplexMode.1
Start monitoring Unisphere Networks / Juniper ERX edge routers (Ethernet duplex/speed/MTU config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ETHERNET-MIB::usdEthernetIfOperDuplexMode OID value, configure state conditions and alerts, and monitor any Unisphere Networks / Juniper ERX edge routers (Ethernet duplex/speed/MTU config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.34 | juniEthernetMIB | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1 | juniEthernetObjects | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1.1 | juniEthernetIfLayer | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1 | juniEthernetIfTable | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1 | juniEthernetIfEntry | Juniper-ETHERNET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5 | usdEthernetIfOperDuplexMode | Unisphere-Data-ETHERNET-MIB |