All MIBs › USR-TRACEROUTE-MIB › usrTracerouteRowStatus
usrTracerouteRowStatus
Module: USR-TRACEROUTE-MIB
OID (symbolic): USR-TRACEROUTE-MIB::usrTracerouteRowStatus
OID (numeric): 1.3.6.1.4.1.429.4.40.2.1.11
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: This object is used to create, modify or delete a row in this table. Setting this object to 'createAndWait' creates the row with default values. Right after creation the value of this object will be 'notReady'. When all parameters are given proper values, this object will return the value 'notInService', at which point the client can set the object to 'active' to activate the row. Modifying this object from 'active' to 'notInService' will cancel any on-going traceroute and remove entries for it from the usrTracerouteHopTable. Setting the object to 'active' again will start a new traceroute with the supplied parameters Setting this object to 'destroy' will stop any on-going activity and delete the row.
What is usrTracerouteRowStatus?
This RowStatus object creates, activates, or destroys a traceroute table row; setting it to createAndWait provisions the row with defaults, and setting it to active starts the trace. Admins drive the entire lifecycle of a traceroute job through this one object, including canceling an in-progress trace by setting it back to notInService. Setting it to destroy stops any running trace and removes the row along with its hop entries.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.40.2.1.11 snmpwalk -v2c -c public <target> USR-TRACEROUTE-MIB::usrTracerouteRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.40.2.1.11.1 snmpget -v2c -c public <target> USR-TRACEROUTE-MIB::usrTracerouteRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.40.2.1.11.1 s <value>
Start monitoring CommWorks/3Com (US Robotics) broadband/remote access equipment (on-demand traceroute path-diagnostic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-TRACEROUTE-MIB::usrTracerouteRowStatus OID value, configure state conditions and alerts, and monitor any CommWorks/3Com (US Robotics) broadband/remote access equipment (on-demand traceroute path-diagnostic status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.40 | usrTraceroute | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.40.2 | usrTracerouteTable | USR-TRACEROUTE-MIB |
| 1.3.6.1.4.1.429.4.40.2.1 | usrTracerouteEntry | USR-TRACEROUTE-MIB |
| 1.3.6.1.4.1.429.4.40.2.1.11 | usrTracerouteRowStatus | USR-TRACEROUTE-MIB |