USR-PPPML-MIB :: usrPPPBaseCCPModemType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › USR-PPPML-MIB › usrPPPBaseCCPModemType

usrPPPBaseCCPModemType

Module: USR-PPPML-MIB

OID (symbolic): USR-PPPML-MIB::usrPPPBaseCCPModemType

OID (numeric): 1.3.6.1.4.1.429.4.11.1.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Indicates the types of call, for which CCP compression will be enabled in the Gateway card PPP module. Possible values are none(0x1) or all (0x10) or subset of digital(0x2), compressed analog(0x4), uncompressed analog (0x08) and pppoe (0x20). Default value is digital and uncompressed analog.

What is usrPPPBaseCCPModemType?

Sets which call types get CCP (compression control protocol) compression enabled in the gateway card's PPP module, as a bitmask: none(0x1), all(0x10), or a combination of digital(0x2), compressed analog(0x4), uncompressed analog(0x08), and pppoe(0x20); it defaults to digital plus uncompressed analog. Adjust this bitmask to control which dial-in call types get link compression applied, balancing CPU load against link efficiency.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.11.1.6
snmpwalk -v2c -c public <target> USR-PPPML-MIB::usrPPPBaseCCPModemType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.11.1.6.1
snmpget -v2c -c public <target> USR-PPPML-MIB::usrPPPBaseCCPModemType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.11.1.6.1 i <value>

Start monitoring CommWorks/3Com broadband/remote access aggregation equipment terminating PPP and PPP multilink sessions (auth/DNS-assignment config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-PPPML-MIB::usrPPPBaseCCPModemType OID value, configure state conditions and alerts, and monitor any CommWorks/3Com broadband/remote access aggregation equipment terminating PPP and PPP multilink sessions (auth/DNS-assignment config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.4commonHDR2-MIB
1.3.6.1.4.1.429.4.11usrPPPUSR-DEFINITIONS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.4.11.1usrPPPBaseUSR-PPPML-MIB
1.3.6.1.4.1.429.4.11.1.6usrPPPBaseCCPModemTypeUSR-PPPML-MIB