USR-IP-ROUTING-MIB :: usrIpRouterId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsUSR-IP-ROUTING-MIBusrIpRouterId

usrIpRouterId

Module: USR-IP-ROUTING-MIB

OID (symbolic): USR-IP-ROUTING-MIB::usrIpRouterId

OID (numeric): 1.3.6.1.4.1.429.4.19.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: the router id is usually the ip address of one of the router's lan interface ip address. this variable can only be set when usrIpAdminStatus is set to disabled.

What is usrIpRouterId?

Sets the router's ID, typically the IP address of one of its LAN interfaces; it can only be changed while usrIpAdminStatus is set to disabled, so an admin must temporarily disable IP routing to update it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.19.1
snmpwalk -v2c -c public <target> USR-IP-ROUTING-MIB::usrIpRouterId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.19.1.1
snmpget -v2c -c public <target> USR-IP-ROUTING-MIB::usrIpRouterId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.19.1.1 a <value>

Start monitoring CommWorks (3Com/U.S. Robotics) remote-access platforms, IP routing (route-table capacity/RIP statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-IP-ROUTING-MIB::usrIpRouterId OID value, configure state conditions and alerts, and monitor any CommWorks (3Com/U.S. Robotics) remote-access platforms, IP routing (route-table capacity/RIP statistics status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrCHS-MIB
1.3.6.1.4.1.429.4commonHDR2-MIB
1.3.6.1.4.1.429.4.19usrIpRoutingUSR-DEFINITIONS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.4.19.1usrIpRouterIdUSR-IP-ROUTING-MIB