All MIBs › USR-IP-ROUTING-MIB › usrIpRipGenAdminStat
usrIpRipGenAdminStat
Module: USR-IP-ROUTING-MIB
OID (symbolic): USR-IP-ROUTING-MIB::usrIpRipGenAdminStat
OID (numeric): 1.3.6.1.4.1.429.4.19.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: this variable is used to disable or enable the ip rip instance at the rip instance level.
What is usrIpRipGenAdminStat?
Turns RIP on or off at the RIP-instance level (as opposed to usrIpRipGenStat, which controls it at the overall IP routing level); both must be enabled for RIP to actually run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.19.14 snmpwalk -v2c -c public <target> USR-IP-ROUTING-MIB::usrIpRipGenAdminStat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.19.14.1 snmpget -v2c -c public <target> USR-IP-ROUTING-MIB::usrIpRipGenAdminStat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.19.14.1 i <value>
Start monitoring CommWorks (3Com/U.S. Robotics) remote-access platforms, IP routing (route-table capacity/RIP statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-IP-ROUTING-MIB::usrIpRipGenAdminStat OID value, configure state conditions and alerts, and monitor any CommWorks (3Com/U.S. Robotics) remote-access platforms, IP routing (route-table capacity/RIP statistics status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | CHS-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.19 | usrIpRouting | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.19.14 | usrIpRipGenAdminStat | USR-IP-ROUTING-MIB |