USR-IP-ROUTING-MIB :: usrIPRterBaseCFMSaveStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsUSR-IP-ROUTING-MIBusrIPRterBaseCFMSaveStatus

usrIPRterBaseCFMSaveStatus

Module: USR-IP-ROUTING-MIB

OID (symbolic): USR-IP-ROUTING-MIB::usrIPRterBaseCFMSaveStatus

OID (numeric): 1.3.6.1.4.1.429.4.19.22

Node type: OBJECT-TYPE

Type: UsrConfigStatus

Access: read-write

Description: Setting the value of this object to `save' causes the values of the SLIP Base Group entries to be written out to the current SLIP config file. While the new config file is being written, the SLIP process will set the value of this flag set to `saving''. Any attempts to set the value while it is not `normal' (i.e. the file is currently being written to the config file) while result in a badValue error being returned. Setting the value to `normal' will result in no action.

What is usrIPRterBaseCFMSaveStatus?

Write "save" to write the current SLIP Base Group settings out to the active config file (the value reads back "saving" while the write is in progress, and attempting another set while it's not "normal" returns a badValue error); writing "normal" itself takes no action.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.19.22
snmpwalk -v2c -c public <target> USR-IP-ROUTING-MIB::usrIPRterBaseCFMSaveStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.19.22.1
snmpget -v2c -c public <target> USR-IP-ROUTING-MIB::usrIPRterBaseCFMSaveStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.19.22.1 s <value>

Start monitoring CommWorks (3Com/U.S. Robotics) remote-access platforms, IP routing (route-table capacity/RIP statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-IP-ROUTING-MIB::usrIPRterBaseCFMSaveStatus OID value, configure state conditions and alerts, and monitor any CommWorks (3Com/U.S. Robotics) remote-access platforms, IP routing (route-table capacity/RIP statistics status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrCHS-MIB
1.3.6.1.4.1.429.4commonHDR2-MIB
1.3.6.1.4.1.429.4.19usrIpRoutingUSR-DEFINITIONS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.4.19.22usrIPRterBaseCFMSaveStatusUSR-IP-ROUTING-MIB