USR-GWCBSP-MIB :: usrGWCBSPTFTPStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › USR-GWCBSP-MIB › usrGWCBSPTFTPStatus

usrGWCBSPTFTPStatus

Module: USR-GWCBSP-MIB

OID (symbolic): USR-GWCBSP-MIB::usrGWCBSPTFTPStatus

OID (numeric): 1.3.6.1.4.1.429.4.38.14.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: TFTP download config type

What is usrGWCBSPTFTPStatus?

Configures when the unit performs a TFTP download: never(0), once(1) on the next boot, or always(2) on every boot, giving an admin control over automated firmware-load behavior.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.38.14.1.8
snmpwalk -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPTFTPStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.38.14.1.8.1
snmpget -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPTFTPStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.38.14.1.8.1 i <value>

Start monitoring CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-GWCBSP-MIB::usrGWCBSPTFTPStatus OID value, configure state conditions and alerts, and monitor any CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.4commonHDR2-MIB
1.3.6.1.4.1.429.4.38usrGWCBSPUSR-DEFINITIONS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.4.38.14usrGWCBSPIPTableUSR-GWCBSP-MIB
1.3.6.1.4.1.429.4.38.14.1usrGWCBSPIPEntryUSR-GWCBSP-MIB
1.3.6.1.4.1.429.4.38.14.1.8usrGWCBSPTFTPStatusUSR-GWCBSP-MIB