USR-GWCBSP-MIB :: usrGWCBSPNetMask

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › USR-GWCBSP-MIB › usrGWCBSPNetMask

usrGWCBSPNetMask

Module: USR-GWCBSP-MIB

OID (symbolic): USR-GWCBSP-MIB::usrGWCBSPNetMask

OID (numeric): 1.3.6.1.4.1.429.4.38.14.1.5

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: IP netmask of the selected interface

What is usrGWCBSPNetMask?

Configures the subnet mask for the selected boot interface's IP address, completing the basic IP configuration needed for network boot and TFTP operations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.38.14.1.5
snmpwalk -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPNetMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.38.14.1.5.1
snmpget -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPNetMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.38.14.1.5.1 a <value>

Start monitoring CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-GWCBSP-MIB::usrGWCBSPNetMask OID value, configure state conditions and alerts, and monitor any CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.4commonHDR2-MIB
1.3.6.1.4.1.429.4.38usrGWCBSPUSR-DEFINITIONS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.4.38.14usrGWCBSPIPTableUSR-GWCBSP-MIB
1.3.6.1.4.1.429.4.38.14.1usrGWCBSPIPEntryUSR-GWCBSP-MIB
1.3.6.1.4.1.429.4.38.14.1.5usrGWCBSPNetMaskUSR-GWCBSP-MIB