USR-GWCBSP-MIB :: usrGWCBSPIPGateway

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › USR-GWCBSP-MIB › usrGWCBSPIPGateway

usrGWCBSPIPGateway

Module: USR-GWCBSP-MIB

OID (symbolic): USR-GWCBSP-MIB::usrGWCBSPIPGateway

OID (numeric): 1.3.6.1.4.1.429.4.38.14.1.4

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: IP gateway for the selected interface

What is usrGWCBSPIPGateway?

Configures the default gateway IP address for the selected boot interface, needed so the unit can reach a TFTP server or management station outside its local subnet.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.38.14.1.4
snmpwalk -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPIPGateway

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.38.14.1.4.1
snmpget -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPIPGateway.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.38.14.1.4.1 a <value>

Start monitoring CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-GWCBSP-MIB::usrGWCBSPIPGateway OID value, configure state conditions and alerts, and monitor any CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.4commonHDR2-MIB
1.3.6.1.4.1.429.4.38usrGWCBSPUSR-DEFINITIONS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.4.38.14usrGWCBSPIPTableUSR-GWCBSP-MIB
1.3.6.1.4.1.429.4.38.14.1usrGWCBSPIPEntryUSR-GWCBSP-MIB
1.3.6.1.4.1.429.4.38.14.1.4usrGWCBSPIPGatewayUSR-GWCBSP-MIB