All MIBs › USR-GWCBSP-MIB › usrGWCBSPDipSwitches
usrGWCBSPDipSwitches
Module: USR-GWCBSP-MIB
OID (symbolic): USR-GWCBSP-MIB::usrGWCBSPDipSwitches
OID (numeric): 1.3.6.1.4.1.429.4.38.17
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The current DIP switch settings
What is usrGWCBSPDipSwitches?
Reports the current physical DIP switch settings on the board as a raw octet string, letting an admin confirm hardware jumper/switch configuration remotely without opening the chassis.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.38.17 snmpwalk -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPDipSwitches
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.38.17.1 snmpget -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPDipSwitches.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usrGWCBSPDipSwitches.1
Start monitoring CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-GWCBSP-MIB::usrGWCBSPDipSwitches OID value, configure state conditions and alerts, and monitor any CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.38 | usrGWCBSP | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.38.17 | usrGWCBSPDipSwitches | USR-GWCBSP-MIB |