All MIBs › USR-GWCBSP-MIB › usrGWCBSPDiag
usrGWCBSPDiag
Module: USR-GWCBSP-MIB
OID (symbolic): USR-GWCBSP-MIB::usrGWCBSPDiag
OID (numeric): 1.3.6.1.4.1.429.4.38.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To enable or disable Mfg Diagnostics
What is usrGWCBSPDiag?
Enables or disables the unit's manufacturing diagnostics mode, a setting typically used during hardware bring-up or troubleshooting rather than normal production operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.38.16 snmpwalk -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPDiag
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.38.16.1 snmpget -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPDiag.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.38.16.1 i <value>
Start monitoring CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-GWCBSP-MIB::usrGWCBSPDiag OID value, configure state conditions and alerts, and monitor any CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.38 | usrGWCBSP | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.38.16 | usrGWCBSPDiag | USR-GWCBSP-MIB |