All MIBs › USR-GWCBSP-MIB › usrGWCBSPCrashEnable
usrGWCBSPCrashEnable
Module: USR-GWCBSP-MIB
OID (symbolic): USR-GWCBSP-MIB::usrGWCBSPCrashEnable
OID (numeric): 1.3.6.1.4.1.429.4.38.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Says whether the crashupload option is Enabled or Disabled
What is usrGWCBSPCrashEnable?
Enables or disables (default varies) automatic uploading of a crash dump to the configured TFTP server after a system crash, letting an admin opt into automated crash-diagnostic collection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.38.15 snmpwalk -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPCrashEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.38.15.1 snmpget -v2c -c public <target> USR-GWCBSP-MIB::usrGWCBSPCrashEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.38.15.1 i <value>
Start monitoring CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the USR-GWCBSP-MIB::usrGWCBSPCrashEnable OID value, configure state conditions and alerts, and monitor any CommWorks/3Com Gateway Controller (GWC) BSP card in a remote access gateway (hardware/firmware inventory status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| 1.3.6.1.4.1.429.4.38 | usrGWCBSP | USR-DEFINITIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.38.15 | usrGWCBSPCrashEnable | USR-GWCBSP-MIB |